Home / Services / Water Testing / Packaged & Mineral Water (IS 14543/13428)

Packaged & Mineral Water Testing

Complete IS 14543 (packaged drinking) and IS 13428 (mineral) panels including bromate and microbiology.

Water Testing

About Packaged & Mineral Water (IS 14543/13428)

Packaged drinking water (IS 14543) and natural mineral water (IS 13428) carry BIS certification marks, and that certification rests on a defined analytical panel that goes beyond ordinary drinking-water testing. CVR Labs runs the complete BIS-scheme panels — physical and chemical parameters, heavy metals, the bromate and residual-disinfectant checks specific to packaged water, and the microbiology including Pseudomonas aeruginosa that the standards mandate.

As a BIS-recognised laboratory we test bottling-line samples and finished product against IS 14543 and IS 13428, supporting both BIS licence applications and the routine release testing a plant must document. Reports are formatted for BIS submission and ongoing surveillance.

Packaged & Mineral Water (IS 14543/13428) at CVR Labs Chennai
Most Requested

Signature tests under Packaged & Mineral Water (IS 14543/13428)

The checks clients most often ask for with this service — we build the right sub-panel around your product and standard.

Physical & chemical (IS 14543 / 13428)Heavy metalsBromateResidual ozone / disinfectantTotal coliforms, E. coliPseudomonas aeruginosa
Test Coverage

What we analyse under Packaged & Mineral Water (IS 14543/13428)

The parameter groups below are drawn from this service's own accredited scope; the full searchable list follows.

BIS certification needs the full panel

Packaged-water marks depend on the complete IS 14543 / IS 13428 panel — partial testing will not support a licence or surveillance audit.

Packaged water has unique parameters

Bromate from ozonation and Pseudomonas aeruginosa are specific to packaged water and are mandatory in the standards.

Routine release is mandatory

Beyond certification, plants must document periodic finished-product testing to keep the BIS licence valid.

Microbiology

Escherichia coliTotal ColiformsPseudomonas aeruginosaFaecal streptococciSulphite reducing anaerobesStaphylococcus aureus

Plate & viable counts

Standard Plate CountTotal viable count 20–22°C / 72 hTotal viable count 37°C / 24 hYeast and Mould

Physico-chemical & organoleptic

pH @ 25°CTotal Dissolved SolidsTurbidityAlkalinity (as HCO3)Colour (True Colour Units)OdourTaste

Anions, ions & contaminants

Bromate as BrO3Chloride (as Cl)Fluoride (as F)Nitrate (as NO3)Sulphate (as SO4)Cyanide (as CN)Calcium & Magnesium
NABL Scope of Accreditation

Packaged & Mineral Water (IS 14543/13428) — parameters & methods

Parameter / Test Method / Standard
Escherichia coli IS 1622IS 15185
Standard Plate Count/Aerobic Plate Count /Total Plate Count IS 1622
Total Coliforms IS 1622IS 15185APHA 24th Edition 9221 B
Aerobic Microbial Count/Total viable colony count at 20- 22°C/ml in 72 hours IS 5402 (Part 1)
Aerobic Microbial Count/Total viable colony countat 37°C/ml in 24 hours IS 5402 (Part 1)
Coliform IS 15185
Faecal streptococci IS 1622IS 15186
Pseudomonas aeruginosa IS 13428 Annex DCVR/MB/SOP/17
Salmonella spp IS 15187CVR/MB/SOP/17
Shigella spp IS 5887 (Part 7)CVR/MB/SOP/17
Staphylococcus aureus IS 5887 (Part 2)IS 5887 (Part 8/Sec 1)ISO 6888-1
Sulphite reducing anaerobes IS 13428 Annex C
Vibrio cholerae IS 5887 (Part 5/Sec 1)IS 5887 (Part 5)ISO 21872-1
Vibrio parahaemolyticus IS 5887 (Part 5/Sec 1)IS 5887 (Part 5)ISO 21872-1
Yeast and Mould IS 16069 (PART 1)
Alkalinity (as HCO3) 2320 B APHA 24th Edition
Alkalinity as HCO3 IS 3025 (Part 23)
Anionic Surface active agents (as MBAS) 5540 C APHA 24th Edition
Anionic Surface active agents as MBAS IS 3025(Part 68)
Bicarbonates as HCO3 2320 B APHA 24th Edition
Bromate as BrO3 ISO 15061
Calcium as Ca 3500-Ca B APHA 24th EditionIS 3025 (Part 40)IS 7224
Chloride (as Cl) IS 3025 (Part 32) Argentometric Method4500-Cl- B APHA 24th Edition4500-Cl - B APHA 24th Edition
Chloride as Cl CVR/WT/SOP/0154500-Cl- B APHA 24th EditionIS 3025 (Part 32) Argentometric Method
Colour (True Colour Units) 2120 B APHA 24th Edition
Cyanide (as CN) 4500-CN- E APHA 24th EditionIS 3025 (Part 27/Sec- 1)IS 3025 (Part 27/Sec 1)
Fluoride (as F) 4500-F- D APHA 24th EditionIS 3025 (Part 60/Sec- 1)IS 3025 (Part 60/Sec 1)
Fluoride as F 4500-F- D APHA 24th EditionIS 3025 (Part 60/Sec- 1)
Iron as Fe 3500-Fe B APHA 24th EditionIS 3025 (Part 53)CVR/INS/SOP/ICPMS/005
Magnesium as Mg IS 3025 (Part 46)3500-Mg B APHA 24th EditionIS 7224
Mineral Oil IS 3025 (Part 39) Clause 65520 C APHA 24th Edition5520 C APHA 24thEdition
Nitrate (as NO3) IS 3025 Part 34 (Ultraviolet Spectrophotometric Screening Method)4500-NO3- B APHA 24th Edition
Nitrate as NO3 IS 3025 (Part 34/Sec- 1) Clause 6.44500-NO3-B APHA 24th EditionIS 3025 (Part 34/Sec 1) Clause6.4
Nitrite (as NO2-) 4500-NO2 B APHA 24th Edition
Nitrite as NO2 IS 3025 (Part 34/Sec- 1)4500-NO2 B APHA 24th EditionIS 3025 (Part 34/Sec 1)
Odour 2150 APHA 24th EditionIS 3025 (Part 5)IS 3025:Part 5
pH @ 25°C IS 3025 (Part 11)4500 H+-B APHA 24th Edition4500-H+ B APHA 24th Edition
Phenolic Compounds (as C6H5OH) 5530 C APHA 24th EditionIS 3025 (Part 43/Sec- 1) Clause 6IS 3025 (Part 43/Sec 1) Clause 6
Residual Free Chlorine 4500-Cl G APHA 24th Edition
Sodium as Na 3500-Na B APHA 24th EditionIS 3025 (Part 45) Clause 5CVR/WT/SOP/021
Sulphate (as SO4) IS 3025 (Part 24/Sec- 1) (TURBIDITY METHOD)4500-SO42- E APHA 24th Edition4500-SO4 E APHA 24th Edition
Sulphide (as H2S) 4500-S2- D APHA 24th EditionIS 3025 (Part 29)4500-S2- D APHA 4th Edition
Sulphide as (H2S) IS 3025 (Part 29)
Taste 2160 C APHA 24th EditionIS 3025 (Part 8)
Total Dissolved Solids at 180 °C IS 3025 (Part 16)2540 C APHA 24th Edition2540C-APHA 24th Edition
Turbidity IS 3025 (Part 10)2130 B APHA 24th Edition
Need a parameter that isn't listed? Share your product and requirement and our technical team will confirm the applicable method, standard and turnaround, and advise whether it falls within our NABL scope. Contact our technical team →
Methods & Standards

How Packaged & Mineral Water (IS 14543/13428) is tested

Reference methods applied

IS 14543 / IS 13428IS 3025 series (physico-chemical)APHA 24th EditionIS 1622 / IS 15185 (microbiology)ISO 15061 (bromate)CVR/INS/SOP/ICPMS/005 (metals)

Physico-chemical parameters follow the IS 3025 series and APHA Standard Methods; bromate is determined by ion chromatography to ISO 15061; trace metals by ICP-MS; and the BIS-mandated microbiology (E. coli, total coliforms, Pseudomonas aeruginosa, sulphite-reducing anaerobes) follows the IS 1622, IS 15185 and IS 13428 annex methods. Where more than one standard applies, the appropriate method is selected for each sample and regulatory requirement.

Accreditation & Recognition

Accreditations covering Packaged & Mineral Water (IS 14543/13428)

See the Accreditations & Scope page for full certificate details.

NABL
BIS
CPCB
ISO 9001
Samples we accept

Samples we accept for Packaged & Mineral Water (IS 14543/13428)

Packaged drinking waternatural mineral waterbottling-line samples
How It Works

From enquiry to accredited report

Request a Quote

Share product, parameters and target standard.

Send Sample

Submit in sealed, labelled packaging or arrange pickup.

Login & Prep

Logged in LIMS with unique IDs and prepared.

Accredited Analysis

Validated NABL-scope methods on advanced instruments.

Test Report

Traceable, accredited report with limit comparison.

FAQ

Packaged & Mineral Water (IS 14543/13428) — frequently asked questions

Is Packaged & Mineral Water (IS 14543/13428) NABL-accredited at CVR Labs?
Yes. Packaged & Mineral Water (IS 14543/13428) is performed under CVR Labs' NABL ISO/IEC 17025:2017 accreditation (Cert. NABLT0626TN18226) at our Chennai laboratory, with traceable, audit-ready reports accepted for compliance and submission.
Which standards apply to packaged water?
Packaged drinking water is tested to IS 14543 and natural mineral water to IS 13428, the BIS standards underlying the certification mark.
Is your lab recognised for BIS packaged-water testing?
Yes. CVR Labs is recognised under the BIS Lab Recognition Scheme 2020, and reports support BIS licence applications and routine release testing.
Why test for bromate and Pseudomonas?
Bromate forms during ozone disinfection and Pseudomonas aeruginosa is a mandated organism for packaged water — both are specific requirements of the standards.
What samples do you accept for Packaged & Mineral Water (IS 14543/13428)?
We routinely handle Packaged drinking water, natural mineral water, bottling-line samples. Share your exact sample type and target standard and our technical team will confirm the required quantity, method and turnaround.
What parameters are included in Packaged & Mineral Water (IS 14543/13428)?
The Packaged & Mineral Water (IS 14543/13428) panel covers 46 accredited parameters such as Escherichia coli, Standard Plate Count/Aerobic Plate Count /Total Plate Count, Total Coliforms, Aerobic Microbial Count/Total viable colony count at 20- 22°C/ml in 72 hours and Aerobic Microbial Count/Total viable colony countat 37°C/ml in 24 hours. The full searchable list is on this page — tell us your target and we'll map the right sub-panel for your sample.

Ready to test with an accredited laboratory?

NABL ISO/IEC 17025:2017 · ISO 9001 · ISO 45001 · CPCB · BIS — trusted since 1999.

Scroll to Top